| 产品特性：穿孔器 | 加工定制：是 | 品牌：台湾马尔禄 |
| 型号：CC-104RW | 适用机械：金属处理 | 种类：金属处理 |
| 重量：5.2 kg | 规格：棘轮式冲孔器 |
CC-104RW
棘轮式穿孔1/2~2"
穿孔以徒手活动板手操作,免油压帮浦、油压缸。
操作说明:
先用电钻3/8"(9.6mm) 冲孔即可让R-1配上1/2"上下的刀模,再套上棘轮式活动板手开始操作。
铁板厚度3.2mm不锈钢2.0mm以下。
新产品少刀型，所穿越的铁屑为两片。
不需油压泵浦与油压缸，可节省费用成本低。
孔径: 1/2"(22mm), 3/4"(27.5mm), 1"(34.3mm), 11/4"(43mm)
尺寸: 11/2"(49mm), 2"(60.8mm)
Ratchet type perforated 1/2~2"
Perforated to unarmed activities board hand operation, free of hydraulic pump, hydraulic cylinder.
Operating instructions:
The first electric drill of 3/8 "(9.6mm) can make the punching knife mold of R-1 with 1/2" from top to bottom, and then board ratchet wheel on the movable sleeve hand began to operate.
Thickness of 3.2mm stainless steel under 2.0mm.
The new product is little knife type, through the iron filings into two pieces.
Without the hydraulic pump and hydraulic cylinder, saving the cost of low cost.
Aperture: 1/2 "(22mm), 3/4 (27.5mm)," 1 "(34.3mm), 11/4 (43mm)"
Size: 11/2 "(49mm), 2" (60.8mm)
