价 格
订货量
￥333.00
1 - 1
￥222.00
价格为商家提供的参考价，请通过"获取最低报价"
获得您最满意的心理价位~
≥2
| 产品特性：平弯工具 | 加工定制：是 | 品牌：台湾马尔禄 |
| 型号：CB-150D | 适用机械：母线排 | 种类：母线加工 |
| 重量：23kg | 规格：母线平弯机 |
CB-150D单回路油压铜铝排平弯工具
输出压力：16TON
宽度：150mm。
平弯能力：10mm
重量：23kg
CB-150D马尔禄弯排机，铜、铝排弯曲工具功能说明：
1.弯曲铜排成铝排弯曲角度90度以下，不损伤到铜的材质。
2.本品是可掀式，当弯曲长条铜排时，N型或L型可以将卡拆出，则可整排拿出不受阻碍。
3.设计上有角度规定90度、45度指示，避免过度。
4.弯曲铜排一定要注意铜排的中心位置，一定要对准刻度0度。
马尔禄液压弯排机特点：
单回路液压弯排机能将母线在其垂直平面内弯曲0～90°。所弯曲的铜、铝排尺寸为10mm×150mm；
液压平弯机配有刻度可读出其弯曲角度；
弯排机,弯曲角度符合***；
液压弯排机可掀式弯曲铜排可以打开拿出；
液压弯排机适用于开关箱，配电盘自动控制盘配线工程。
液压弯排机是铜、铝母线平弯专用液压机具，需配合马尔禄手动泵CP-700、MAL电动液压泵或CFP-800 脚踏液压泵使用。
Categories: single circuit hydraulic copper row flat bending tool
The output pressure: 16TON
Width: 150mm.
Flat bending capacity: 10mm
Weight: 23kg
CB-150D Marr Paul bending machine, copper, aluminum row bending tool function description:
1 bending copper to aluminum row bending angle 90 degrees below, no damage to the copper material.
2 this product is lifted when the bending strip, copper bar, type N or type L can be card lending, can the whole row out unhindered.
There are 90 degree, 45 degree angle to set indicates 3 design, avoid excessive.
4 bending copper attention must be paid to the center position of copper, always at the scale of 0 degrees.
Marlo hydraulic bending machine features:
Single circuit hydraulic bending machine can bus in the vertical plane bending of 0 ~ 90 deg.. The maximum size of row bent copper and aluminum is 10mm * 150mm;
Hydraulic flat bending machine equipped with the scale read the bending angle;
Bending machine, bending angle in line with national standards;
Hydraulic bending machine can lift type bending copper can open out;
Hydraulic bending machine is applicable to the switch box, automatic control panel wiring project switchboard.
Hydraulic bending machine is copper, aluminum busbar bending machine hydraulic leveling, required with the use of CP-700, manual pump Marr Paul MAL electric hydraulic pump or CFP-800 pedal hydraulic pump.
